V2ray Mikrotik 【Essential】

– Redirect all outbound TCP/UDP traffic to the proxy box:

: You need an ARM or x86-based MikroTik router (e.g., hAP ax series, RB5009, or CHR). Small MIPSBE devices generally cannot run containers.

/interface veth add name=veth_v2ray address=172.16.10.2/24 gateway=172.16.10.1 Use code with caution. Define the bridge and assign the gateway IP: v2ray mikrotik

Deploy V2Ray on your secondary Linux device inside your local network. 192.168.88.1 V2Ray Proxy Server IP: 192.168.88.10

Here’s a technical write-up on using with MikroTik (RouterOS). This covers the common use case: V2Ray client on a MikroTik router to route traffic through a V2Ray server (VMess/VLess). – Redirect all outbound TCP/UDP traffic to the

"protocol": "vmess", "settings": "vnext": [

If your connection is being blocked, ensure you are using WebSocket+TLS or a similar obfuscation method, and verify your SERVER_NAME (SNI) matches the config. Define the bridge and assign the gateway IP:

/container add remote-image=v2fly/v2fly-core:latest interface=veth1 root-dir=usb1/v2ray /container start 0

Ensure the traffic leaving the MikroTik towards the V2Ray client is NATed properly so it can return.

Before starting, ensure your environment meets these hardware and software specifications: