Shell Alvania G3 Data Sheet ^hot^
-20°C to +120°C (Peak up to 130°C) 2. Key Benefits and Performance Features Superior Mechanical Stability
The following data represents the typical properties of Shell Alvania G3 during its production life. These specifications are crucial if you are trying to match this grease with a modern alternative or cross-reference it with equipment manufacturer manuals. Physical and Chemical Properties Value / Specification Test Method Thickener Type Lithium Soap Base Oil Type Base Oil Viscosity @ 40°C 100 mm²/s (cSt) Base Oil Viscosity @ 100°C 9.1 mm²/s (cSt) Cone Penetration (Worked, 60 strokes) 220–250 (0.1 mm) Dropping Point 180°C (356°F) minimum Operating Temperature Range -20°C to +120°C Continuous use Color Brown / Amber Texture Smooth, Buttery Key Features and Performance Benefits
The "G" in the name stands for "General purpose." Alvania G3 is engineered to provide long bearing life under normal to heavy loads, moderate speeds, and environments prone to moisture ingress.
Avoid mixing with polyurea, clay (bentonite), or calcium sulfonate greases. Mixing with other lithium greases (same base oil type) is generally acceptable but not optimal. Always purge old grease completely. shell alvania g3 data sheet
For detailed safety information, please refer to the .
3 (Firm, similar to a vegetable shortening consistency) Thickener Type: Lithium Soap Base Oil Type: Mineral Oil
It was widely specified for ball and roller bearings operating at elevated speeds where structural stability is required to prevent excessive heat generation from fluid friction. 3. Vertical Shaft Orientations -20°C to +120°C (Peak up to 130°C) 2
Resisted structural breakdown under high shear stresses, ensuring long-term lubrication.
Approximately 100 mm²/s (cSt)
Shell Alvania G3 was engineered primarily as an industrial bearing grease, excelling in environments that demanded a firmer lubricant structure. 1. Electric Motor Bearings Physical and Chemical Properties Value / Specification Test
Gravity pulls softer greases down and away from the lubrication zone in vertical shafts. Alvania G3’s firm texture allowed it to stay put inside the bearing cage. 4. General Industrial Machinery
This is the most critical section for engineers and maintenance teams. Below is a detailed table based on the manufacturer’s typical values. Note that specific batch certificates may vary slightly, but these figures represent the industry-standard data sheet.