Mounting your television clears up media console space and creates a clean, cinematic look in your living room. The Equatech Universal TV Wall Mount is engineered to support flat and curved screens ranging from 32 inches up to a massive 100 inches.
Now you must secure the heavy-duty wall plate to the structural part of your wall.
As a rule of thumb, the center of your television screen should sit at in your primary viewing spot. For most standard couches, this places the center of the screen roughly 42 inches from the floor. Use measuring tape and painter’s tape to map out the physical dimensions of the TV on the wall to preview the placement before drilling. Option A: Installing on Wood Studs (Drywall)
Now that your TV is safely on the wall, you can optimize your viewing angle. equatech universal tv wall mount 32 to 100 instructions
The instructions for the Equatech mount begin not with tools, but with verification. The range of 32 to 100 inches covers a vast spectrum of television weights and VESA (Video Electronics Standards Association) patterns. A critical first step outlined in the manual is checking compatibility. While the "universal" designation implies broad fitment, the instructions guide the user to verify that their TV’s VESA dimensions—measured as the horizontal and vertical distance between mounting holes—fall within the bracket’s capabilities. Furthermore, the instructions emphasize weight capacity. A 100-inch television carries significantly more mass than a 32-inch model; therefore, understanding the weight rating of the specific Equatech model is paramount to preventing structural failure. This preparatory phase transforms the installation from a simple handyman task into an engineering safety check.
Before we dive into the installation instructions, let's take a look at the components and accessories that come with the Equatech Universal TV Wall Mount 32 to 100:
Use a stud finder to locate two studs (16″ or 24″ apart). Mark the desired center height of the TV (usually eye level when seated). Hold the wall plate against the wall at that height, , and mark the screw holes over the studs. Mounting your television clears up media console space
Use a tape measure to mark the desired height of your TV. Keep in mind that the center of the television should ideally sit at eye level when you are seated.
With one person on each side of the television, carefully lift the TV up toward the wall plate. Keep the screen tilted slightly forward at the top.
Visit the official Equatech support website for model-specific video tutorials or contact their helpline with your mount’s serial number. Keep your instruction manual in a safe place (or photograph it) for future adjustments or moving. As a rule of thumb, the center of
Equatech includes a paper template or cardboard guide. Tape it to the wall at your marked height, aligning the holes with stud centers. Use a level to ensure it’s straight. Mark all bolt holes through the template.
: Drill pilot holes into the marked studs and securely fasten the wall plate using lag bolts. Ensure all bolts are tight and the plate is stable.
The is a heavy-duty steel bracket designed to support flat-panel displays ranging from 32" to 100" . It features a maximum load capacity of 55kg (approx. 121 lbs) and offers versatile viewing angles with integrated tilt options. Pre-Installation Checklist
is a straightforward project that transforms a room by freeing up floor space and optimizing viewing angles. This versatile mount is designed to support a wide range of television sizes, from compact 32-inch monitors to massive 100-inch screens, provided the wall structure can support the weight. Preparation and Tool Checklist Before starting, gather the necessary tools:
Pro tip: For 100-inch TVs, double-check that the mount does not block power outlets or wall ports.