Firstchip Fc1178 Fc1179 Mptools V1.0.5.2: -

Before diving into the software, it is crucial to understand what the FC1178 and FC1179 are. These are low-cost, single-channel USB 2.0 and USB 3.0 flash drive controllers manufactured by (also known as Chipsbank or CBM). They are incredibly common in budget-friendly USB drives from brands like PNY, Verbatim, Kingston (some older models), and countless generic "no-name" drives.

If a USB drive built on the FC1178 or FC1179 controller shows the following behaviors, MpTools can generally repair it:

When using mass production tools, please bear the following points in mind:

FirstChip MpTools is a professional mass production tool officially released by FirstChip (One-Core) for USB drives based on its self-developed controller chips. Unlike ordinary formatting or data recovery software, this is a low-level hardware programming platform used for full lifecycle mass production support of embedded USB storage products such as USB flash drives, mobile solid-state drives (UFD), and OTG storage devices. Firstchip Fc1178 Fc1179 Mptools V1.0.5.2 -

Firstchip Fc1178 Fc1179 Mptools V1.0.5.2 is a specialized mass production (MP) utility used for the repair and firmware flashing of USB flash drives. It is specifically designed for storage devices using the line of controllers, primarily the Core Purpose & Usage

Many cheap USB drives on the market use counterfeit capacity or inferior Flash chips. These have a low success rate for repair and may not be fixable at all.

: Supports both Chinese and English (toggleable in the settings menu). Auto-Detection Before diving into the software, it is crucial

What are the exact and Flash ID details from your ChipGenius scan?

No installation is required. MPTools is portable.

: Always connect your target drive directly to a motherboard-bound USB 2.0 port . USB 3.0/3.1 controllers can drop data packets during low-level flashing, which causes write failures. Avoid external USB hubs. If a USB drive built on the FC1178

If you would like to proceed with repairing your drive, let me know:

Do not unplug the USB drive during mass production, and ensure a reliable power supply.