Avery Berkel L126 Calibration Link Instant

[Normal Weigh Mode] │ (Press SW1 Switch) ▼ [DIAG Display] ──► Press Zero twice ──► [CAL Display] │ (Press Test) ▼ [Select Units] (Ounce/Lb/Kg) │ (Press Test) ▼ [Set Target Span Value] │ (Press Test) ▼ [LOAD ZERO] ──► (Empty Platform) ──► Press Test │ ▼ [LOAD SPAN] ──► (Place Weights) ──► Press Test │ ▼ [DONE] Step 1: Accessing the Service Mode

If the procedure fails, you are not alone. Here are the most frequent issues:

Place the scale in a room with a stable temperature (ideally around 20°C / 68°F). Avoid areas near heating vents, air conditioners, or direct sunlight.

Drafts, mechanical vibrations, or a shaky workbench surface. avery berkel l126 calibration

Gently position your certified weights onto the absolute center of the scale platform to prevent side-loading errors.

The scale needs to know what "zero" looks like with nothing on the platform. Ensure the scale platform is empty and clean. Select the option from the menu.

Press the Zero button twice until the display changes to "CAL" . Confirm this selection by pressing the Test button. [Normal Weigh Mode] │ (Press SW1 Switch) ▼

To extend the time between calibrations on your Avery Berkel L126, follow this schedule:

Clear the scale's weighing platform completely. Ensure no debris, water, or tools are resting on the pan. The screen will read .

button to toggle between units (e.g., pounds or ounces). Press the button to confirm your choice. Set Zero Point Drafts, mechanical vibrations, or a shaky workbench surface

: Place the base scale platform on a completely flat, vibrating-free surface. Drafts, AC vents, or uneven structural floors will disrupt zero-balance calibration.

Maintains legal-for-trade certification required for retail sales.