Bosch Kl 1208 User 39-s Manual

Never connect or disconnect the charger clamps while the power cord is plugged into the wall. This prevents dangerous sparks near the battery terminals.

Most keypads allow for manual panic triggers:

220V – 240V AC, 50/60 Hz (Standard European/International mains power) Output Voltage: 12V DC Charging Current: 8 Amps (Arith.) / 12 Amps (Eff.) Bosch Kl 1208 User 39-s Manual

Here’s why the deserves more than a glance, and how to use it to get a decade of reliable service from your charger.

Since Bosch no longer ships this manual with new tools, you must rely on digital archives. Here are the most reliable sources: Never connect or disconnect the charger clamps while

: Battery acid is highly corrosive. If it contacts skin or eyes, rinse immediately with large amounts of water for 15 minutes and consult a doctor.

: Do not use the charger in ambient temperatures above 35°C or in damp environments. Since Bosch no longer ships this manual with

IP 20 (Protected against solid objects up to 12mm; not waterproof) 2. Safety Precautions and Workplace Setup

Monitor the integrated analog ammeter display on the front panel.

This mode is used when the premises are vacated.

: Ensure the charger’s output voltage matches the 12V rating of your battery.